Mishra Hydraulics Manufacturer of Hydraulic Cylinder, Pneumatic Cylinder Double Acting, Hydraulic Baling Press

Application
Rubber moulding, bekalite moulding, SMC (Sheet moulding), Coir mattress pressing operation, blanking, coining, riveting, stamping, punching, assembling, forming etc.

Frame Structure
• Fabricated frame ‘H' type (Gate Type), Capacity 1 Ton-5000 Tons.
• Fabricated frame ‘C' type (Gate Type), Capacity 2 Ton-600 Tons.
• Pillar Type (Rounded & Square) Presses capcacity 1 Ton- 1000 Tons.

Operation Mode
• Manual operated by hand lever valves.
• Semi automatic by electric control panel
• Fully automatic by PLC

1) Deep Draw Presses

Double action deep draw pressed for stainless steel, kitchen sinks with & without bottom cushioning arrangement.

Double action deep draw presses for LPG gas stoves, LPG cylinders, aluminium & S.S. utensils, geysers body, automobile parts, bath tubs, wheel, surgical items, decorated items, truck, car, bus, scooter body components.

2) Compression Moulding Presses

Compression moulding presses used for bekalite moulding, sheet moulding, thermo-setting components, plastic sheets, plyboards, particle boards, rubber sheets, rubber mats including cat mats, medical parts, belts, conveyor belts, transmission belts, tyre tube & flap moulding, battery containers, oil seal compression, footwear, soul, straps, EVA sheets, switch gear.

3) Large Platten Hyd. Presses

• Rubber mats molding presses
• Rubber sheets molding presses
• Coir mattress molding presses
• Plyboards, particle boards, flush boards presses,
• Deep drawing presses for aluminium parts.

Conveyor Belt Press	Hydraulic Multi Daylight Press for Rubber Moulding
Hydraulic Multi Daylight Press For Coir Mattress Pressing	Hydraulic Pillar Type Press
Hydraulic Press for Conveyor Belt	Hydraulic 'C' Type Press
Hydraulic Press for Sheet Metal	Hydraulic Multi Daylight Press for Rubber Moulding
Hydraulic Press	Hydraulic 'C' Type Press
Hydraulic Press	Hydraulic Multi Daylight Press
Hydraulic Multi Daylight Press for Rubber Moulding

Technical Specification

Rubber Moulding Hydraulic Press (Upstroking)

Model	Plate Size (mm)	Capacity (Ton)	Ram Dia. (Inch)	Stroke (mm)	Daylight (Nos.)	Working Pressure (Ton)
MRMP-1420	14 x 20	50	8	450-550	5-6	1 Ton
MRMP-1818	18 x 18	50	8	450-550	5-6	1 Ton
MRMP-1824	18 x 24	78	10	450-550	5-6	1 Ton
MRMP-2424	24 x 24	113	12	450-550	5-6	1 Ton
MRMP-2428	24 x 28	254	18	450-550	5-6	1 Ton
MRMP-2432	24 x 32	314	20	450-550	5-6	1 Ton
MRMP-2832	28 x 32	314	20	450-550	5-6	1 Ton
MRMP-3636	36 x 36	452	24	450-550	5-6	1 Ton
MRMP-3642	36 x 42	530	26	450-550	5-6	1 Ton
MRMP-4852	48 x 52	615	28	450-550	5-6	1 Ton
MRMP-5656	56 x 56	706	30	450-550	5-6	1 Ton
MRMP-5672	56 x 72	1017	36	450-550	5-6	1 Ton

Note: Other than above mentioned models we also manufacture presses as per customer need and requirement.

Mishra Gate Type (H Frame) / Four Pillars Models

Model	Capacity	Ram Stroke	Daylight	Main Table Size (mm)		Ram Table Area (mm)		Table Height from ground level	T-Slot Size across corners	Speeds (mm / sec)			Motor Capacity	Cylinder Bore	Max. Working Pressure
	(Tons)	(mm)	(mm)	Front-Back	Left-Right	Front-Back	Left-Right	(mm)		Fast Approach	Pressing	Return	(H.P.)	(mm)	(Kg/Cm²)
MGPP-30	30	400	600	400	500	500	600	750	T-22	60	10	100	5	125	250
MGPP-45	45	400	600	400	500	500	600	750	T-22	60	10	100	7.5	150	250
MGPP-60	60	400	600	500	600	500	600	750	T-22	60	10	100	10	175	250
MGPP-100	100	500	800	600	700	600	700	750	T-28	60	9	80	15	225	250
MGPP-150	150	500	800	600	700	600	700	750	T-28	80	8	80	20	275	250
MGPP-200	200	500	800	700	800	600	700	750	T-28	100	6	80	20	320	250
MGPP-250	250	600	900	700	800	700	800	750	T-28	100	6	60	25	360	250
MGPP-300	300	600	900	700	800	700	800	750	T-28	100	6	60	30	390	250
MGPP-400	400	700	1000	800	1000	800	1000	750	T-28	125	6	60	40	450	250
MGPP-500	500	700	1000	800	1000	800	1000	750	T-28	125	6	60	50	500	250

Note: Other than above mentioned models we also manufacture presses as per customer need and requirement.

Mishra Gate Type Deep Drawing Press with Die Cushion

Model	Main Ram Cylinder	Main Ram Stroke	Die Cushion Capacity	Die Cushion Stroke	Day light	Main Table Area (mm)		Ram Table Area (mm)		Table Height above Floor Level	T-Slot Size Across Corners	Speed (mm / sec)			Motor Capacity	Cylinder Bore	Max. Working Pressure
	(mm)	(mm)	(Tons)	(mm)	(mm)	Front-Back	Left - Right	Front-Back	Left - Right	(mm)		Fast Approach	Pressing	Return	(H.P.)	(mm)	(Kg/Cm²)

100-40	100	400	40	200	700	700	800	700	800	750	T-28	60	15	100	25	225	250
150-50	150	500	50	250	850	700	800	700	800	750	T-28	80	15	100	40	275	250
200-100	200	600	100	300	1050	800	1000	800	1000	750	T-28	100	15	100	50	320	250
250-100	250	600	100	300	1050	800	1000	800	1000	750	T-28	125	12	80	50	360	250
300-120	300	700	120	350	1150	1000	1200	1000	1200	750	T-28	150	10	80	50	390	250
400-150	400	800	150	400	1300	1000	1200	1000	1200	750	T-28	150	11	80	75	450	250
500-200	500	900	200	400	1450	1000	1200	1000	1200	750	T-28	150	9	80	75	500	250

Note: Other than above mentioned models we also manufacture presses as per customer need and requirement.

Mishra “C” Frame Hydraulic Press

Model	Capacity	Table Size	Floor to Bolster	Slide Size	Motor Capacity	Daylight	Stroke	Speed ( mm / sec )
	(Ton)	(mm)	(mm)	(mm)	(H.P.)	(mm)	(mm)	Up	Down	Pressing
MCP-01	1	380 x 250	750	300 x 150	2	270	150	120	60	18
MCP-02	2	400 x 290	750	300 x 200	3	270	150	120	60	18
MCP-03	3	400 x 290	750	300 x 200	3	270	150	120	60	18
MCP-05	5	485 x 330	750	385 x 250	5	325	200	120	60	18
MCP-10	10	500 x 350	750	400 x 250	5	350	250	120	60	18
MCP-20	20	600 x 400	750	500 x 300	5	500	350	120	60	18
MCP-30	30	700 x 500	750	600 x 400	7.5	500	350	120	60	18
MCP-50	50	700 x 500	750	600 x 400	10	500	350	120	60	18
MCP-100	100	1000 x 700	900	800 x 600	15	700	500	120	60	15
MCP-200	200	1000 x 700	900	800 x 600	20	700	500	130	130	10
MCP-300	300	1200 x 800	1100	1000 x 700	30	800	600	140	140	8
MCP-400	400	1200 x 800	1100	1000 x 700	40	800	600	180	180	8
MCP-500	500	1500 x 900	1300	1200 x 800	50	900	600	180	180	7
MCP-600	600	1500 x 900	1300	1200 x 800	50	900	600	180	180	6

Note: Other than above mentioned models we also manufacture presses as per customer need and requirement.